International Conference on Electronics, Computer and Manufacturing Engineering

International Helpline :
  • 1(415) 830-3744
  • Skype : support.research
  • ind : +91 9781001229
For contacteditor@ureng.org

Other Conferences of URENG

Associated With

Conference Program

UR and URUAE Tentative Program March 29-30, 2017, Singapore

March 29, 2017 (Wednesday) Venue: Back of TASTE Restaurant

3:00 p.m. -  5:00 p.m.

Arrival and Registration

 

March 30, 2017 (Thursday) Venue: Conference Hall 1

9:00-9:05

Opening Remarks

Prof. Dr. P. S. Sandhu

Professor and Director-Principal (Ex.), Rayat-Bahra University, India

9:05-9:35

Keynote Speech 1

Prof. Jayarama Reddy

Professor and Principal Investigator, St. Joseph’s Post Graduate and Research Centre, India

Topic: “Important Medicinal Plant Families and Plant Based Drugs: A Review”

9:35-10:05

Keynote Speech 2

Prof. Sujoy Kumar Saha

Profesor, Indian Institute of Engineering Science and Technology Shibpur, India

Topic: Advances in Heat Transfer Enhancement

10:05-10:15

Photo Session & Coffee Break

 

March 30, 2017 (Thursday)

SESSION-I

Venue: Conference Hall 1

Session Chair: Prof. Sujoy Kumar Saha

Time: 10:15 am-01:00 pm

Paper Id

Registered Author and Affiliation*

Paper Title

Authors

5th International Conference on Advances in Chemical, Biological & Environmental Engineering (ACBEE-17)

U0317201

Afrah Saad Al-Mahfadi,

PhD Student, Scientific Institute - University of Mohammed V., Rabat, Morocco

Causes and Effects of Coastal Wetlands Degradation in Yemen

Afrah S. M. Al-Mahfadi and Mohamed Dakki

U0317208

Saranya Manatsakarn,

Master Student, Program in Environmental Pollution and Safety, School of Environmental Health, Suranaree University of Technology, Thailand

Estimating Emission Factors of Fifteen Categories of Meats from Thai-style Barbeque Activities

Saranya Manatsakarn and Nares Chuersuwan

U0317209

Benchamaphon Sukton,

Master Student, Program in Environment Pollution and Safety, Suranaree University of Technology, Thailand

Evaluating Heavy Metals in Groundwater around a Waste Dumping Site

Benchamaphon Sukton and Nares Chuersuwan

U0317210

Anchalee Katramee,

Master Student, Program in Environmental Pollution and safety, School of Environmental Health, Suranaree University of Technology, Thailand

A Low Cost Tube-type Passive Sampler for Ambient BTEX Monitoring in Urban Settings, Thailand

Anchalee Katramee and Nares Chuersuwan

U0317203

CH. Rama Krushna Chary,

Kuwait Oil Company, Kuwait

Step towards Sustainable Drilling Operations by Turning Waste into Value A case study of Oil & Gas Company

CH. Rama Krushna Chary, Mohammad Al-Mulla

Mohammad Al-Mulla,

Kuwait Oil Company, Kuwait

U0317204

Divya Baskaran,

PhD Student, Annamalai University, India

Microbial Degradation of Benzene by Mixed Culture

Divya Baskaran and Ravi Rajamanickam

U0317206

Jiah Chee Soh,

Master Student, Universiti Malaysia Pahang, Malayasia

Ethylene Production from Ethanol Dehydration over Zeolite Y under Mild Conditions

Jiah Chee Soh, Soo Ling Chong and Chin Kui Cheng

U0317207

SooLing Chong,

Student, Universiti Malaysia Pahang, Malaysia

Catalytic Performance of H3PO4-Modified Cerium Oxide as Catalyst for Ethylene Production from Ethanol Dehydration

SooLing Chong, JiahChee Soh and ChinKui Cheng

U0317212

Sopitcha Phetrong,

Student, Thammasat University, Thailand

Synthesis and Temperature-Responsive Behavior of N-vinylcaprolactam-grafted Natural Rubber

Sopitcha Phetrong, Chanon Sansuk, and Peerasak Paoprasert

U0317213

Chanon Sansuk,

Student, Thammasat University, Thailand

Preparation and Characterization of Deproteinized Natural Rubber Grafted with 4-Vinylpyridine as pH responsive materials

Chanon Sansuk, Sopitcha Phetrong, and Peerasak Paoprasert

U0317217

Kyeong Sik Jin

Dr., Pohang Accelerator Laboratory,

Republic of Korea

Small-angle X-ray Scattering Beamline BL4C SAXS at Pohang Light Source II, Korea

Kyeong Sik Jin and Kwang-woo Kim

U0317218

Sujoy Kumar Saha

Professor, Indian Institute of Engineering Science and Technology Shibpur, India

New Correlations for Friction Factor and Nusselt number Prediction for Laminar Flow in a Circular Duct having Only Spiral Corrugations & Only Twisted Tapes with Oblique Teeth

Sujoy Kumar Saha

U0317220

Dr. Nitin Goyal

Assoc. Prof., Manipal University Jaipur

Dispersion Modelling of Air Pollutants of Coal Based Thermal Power Station

Nitin Goyal and Anil Dutt Vyas

U0317221

Maryam Amin

Department  of Hematology, School of Medical Science, Tarbiat Modares University, Tehran, Iran

Proliferation of RPE Cells Exposed to Different Concentrations of  Platelet Gel in Cell Culture

Amin M, Soleimani M, Balagholi S, Rezaei Kanavi M

U0317219

Parvez Singh Slathia

Assit Prof., Department of Biotechnology, Shri Mata Vaishno Devi University, Kakrial, Katra, J&K, India

Production of ethanol from alkali pretreated pine needles using different fermentation methods

Parvez Singh Slathia and Preeti Sharma

                                                                                                                                                  

March 30, 2017 (Thursday)

POSTER SESSION

Venue: Conference Hall 1

Session Chair: Prof. Dr. P. S. Sandhu

Time: 9:00 am-11:15 am

Paper Id

Registered Author and Affiliation*

Paper Title

Authors

5th International Conference on Civil, Architecture, Environment and Waste Management (CAEWM-17)

AE0317316

Jieh-Jiuh Wang,

Professor, Department of Architecture, Ming Chuan University, Taiwan

Enhancement of Taiwan Local Government Disaster Management Capacity by National Policy: A Performance Evaluation

Jieh-Jiuh Wang

AE0317323

Assoc. Prof. Dr. Mehmet Sinan Bilgili,

Yıldız Technical University, Turkey

The Impact of TiO2 Nanoparticles on Aerobic Decomposition of Municipal Solid Waste

Mehmet Sinan Bilgili, Senem Yazici Guvenc, and Burcu Alan

6th International Conference on Electronics, Computer and Manufacturing Engineering (ICECME'2017)

U0317105

Hee Cheol Kim,

Student, Seoul National University of Science and Technology, Korea

A Formability Study of a Warm Multi-step Bit Forming of Subminiature Screws

Hee Cheol Kim, Geum Ju Na, Kwang Lim Lee, Keun Park and Jong Bong Kim

U0317106

Yeon Hui Jang,

Student, Dept. Automotive Eng. Seoul Nat. Univ. of Sci. and Tech., Korea

Design of the Safety Coupling by using Finite Element Method

Yeon Hui Jang, Geum Ju Na, Hye Kyung Jung and Jong-Bong Kim

5th International Conference on Advances in Chemical, Biological & Environmental Engineering (ACBEE-17)

U0317216

Dr. Preeti Sharma

Assistant Professor, Department of Biotechnology, Shri Mata Vaishno Devi University, Kakrial, Katra, J&K., India

Phytoremediation of Devika river water using Lemnoideae (Duckweed)

Preeti Sharma and  Parvez Singh Slathia

           

   

1:00 pm -2:00 pm

LUNCH

March 30, 2017 (Thursday)

SESSION-II

Venue: Conference Hall 1

Session Chair: Prof. Jayarama Reddy

Time: 2:00 pm-4:00 pm

Paper Id

Registered Author and Affiliation*

Paper Title

Authors

5th International Conference on Civil, Architecture, Environment and Waste Management (CAEWM-17)

AE0317303

Shraddha Mahore Manjrekar,

Associate Professor, Brick School of Architecture, Pune, India

Study of Sustainability Practices Ingrained in Indian Culture

Shraddha Mahore Manjrekar

AE0317305

Ervin Fernandez Papa,

Instructor, Cavite State University - Naic , Philippines

Batch and Fixed Bed Column Studies on Cadmium (II) and Lead (II) Adsorption from Aqueous Solution by Coffee Pulp Biochar

Ervin F. Papa

AE0317307

Jesus Paolo B. Cullado,

Instructor/Research Unit Head, Cavite State University-Naic, Philippines

Design, Sizing and Evaluation of a Photovoltaic Aeration System

J.P.B. Cullado

AE0317319

Kosuru Srivalli,

Assistant Professor, School of Planning and Architecture, University of Mysore, Manasagangotri, India

Review of Existing Urban Waterfronts of India with Particular Reference to Vijayawada

Kosuru Srivalli, and Krishne Gowda

AE0317318

Madhuri Damaraju,

PhD Student, Indian Institute of Technology-Hyderabad (IIT-Hyderabad), India

Polishing of a Palm Oil Mill Effluent Using a Bipolar-mode Electrocoagulation Setup: Optimization of the Process Using Response Surface Methodology

Madhuri Damaraju, Debraj Bhattacharyya, Tarun Kanti Panda, and Kiran Kumar Kurilla

Kiran Kumar Kurilla,

Joint Managing Director, Rahyals Envergy India Pvt Ltd, India

Debraj Bhattacharyya,

Assistant Professor, Indian Institute of Technology Hyderabad (IIT Hyderabad), India

AE0317321

Benouaret lamia,

PhD Student, Laboratory AVMF university of Constantine 03, Algeria

Process in Urban Project, Case Bejaia Port Implementation (Algeria)

Lamia Benouaret, Dr. Dakkoumi Djamel, and Prof. Dr. Pedro Fernández Carrasco

AE0317304

Jayarama Reddy

Professor, St. Joseph’s College, Bangalore, India

Important Medicinal Plant Families and Plant Based Drugs: A Review

Jayarama Reddy

AE0317325

Betty Lala

Assistant Professor, Manipal University, India

Analysis of Thermal Comfort Study in India

Betty Lala

AE0317327

Fong Wai Loon

Faculty of Engineering and the Built Environment, SEGi University, Malaysia

Waste Audit at Food and Beverage Outlet - A Case Study in Selangor, Malaysia

Wai Loon FONG and Jenny ONG

 

March 30, 2017 (Thursday)

SESSION-III

Venue: Conference Hall 1

Session Chair: Assoc. Prof. Deepak D

Time: 4:00 pm-5:00 pm

6th International Conference on Electronics, Computer and Manufacturing Engineering (ICECME'2017)

Paper Id

Registered Author and Affiliation*

Paper Title

Authors

U0317110

Sigit Widiyanto,

Student, Department of Information System, Gunadarma University, Indonesia

Fat Content, Color, and Texture Features for Fresh Meat Evaluation from Digital Image

Sigit Widiyanto, Yuli Karyanti, Dini Tri Wardani, and Yulia Charli

U0317111

Jakkree Wichairahad,

Lecturer, Faculty of Engineering, Chaiyaphum Rajabhat University, Chaiyaphum, Thailand

The Calculation Techniques of Non-Matrix Representation Flexible Joint Stiffness to Improve the Accuracy of Beam Element FEA

Jakkree Wichairahad, Sirintra Tan-Intara-Art and Wiparat Nisapai

U0317104

Deepak D

Associate Professor, Manipal Institute of Technology, Manipal University, Manipal -576104, India

Optimization of Process Parameters in Abrasive Water Jet Drilling of D2 Steel to Produce Minimum Surface Roughness Using Taguchi Approach

Deepak D, Anjaiah D, Sawan Shetty

U0317107

Amar Murthy Ambekar

Assistant Professor, Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University, Manipal, India

Thermo-Structural Analysis of Disc Brake for Maximum Heat Dissipation

Amar Ambekar, Amit Bharti, Shashank Shekhar, Anushtup Biswas

U0317108

Manjunath Mallashetty Shivamallaiah

Assistant Professor, Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University, Manipal, India-576104

Numerical Analysis on the Influence of a Novel Semi-D shaped Turbulator on Heat Transfer Enhancement of Solar Air Heater

Manjunath M.S, K.Vasudeva Karanth and N.Yagnesh Sharma

U0317109

Narayanan S.

Assistant Professor, Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University, Manipal, India

Performance Evaluation of Machine Tap for tapping Al6061-T6 Aluminium Alloy

Narayanan S, Nagaraja, Raviraja Adhikari

U0317113

Sunil Kumar Goyal

Associate Professor, Manipal University Jaipur,  India

A Detailed Investigation on Performance Analysis of Self-Excited Induction Generator

Sunil Kumar Goyal, D.K. Palwalia

 

       3:30 pm - 4:00 pm

Parallel Coffee Break